SANIT WC element INEO PLUS disabled 1120/450
Article number:
90.744.00..T000
GTIN:
4013341660631
Description
WC element INEO PLUS, handicapped accessible
equipped with revision box for connection facility for shower toilets and electronic release, with INEO FRESH box for water box cube, with small access opening, for wall-hung WC with mounting distance 180/230mm, front-operated, h/w/d: 1, 120/450/130mm, WC mounted 50mm higher than the standard height, for wall-hung WCs with an overhang > 60 cm, self-supporting powder-coated steel frame, for covering with plasterboard, installation onto a solid wall, in drywall constructions etc. , 4-point-fastening, fully pre-assembled, includes self-locking feet with swivel base plates and fastening set, adjustment range of feet from
unfinished floor level to upper edge of finished floor level: 0-200mm, adjustment range front to wall: 135-205mm (when mounted on wall brackets code no. 17. 257. 00. . T000), with back-to-back installation distance between front edges 270-310mm, with SANIT double bend, SANIT concealed cistern with insulation against condensation (CC-121-S-FO-2V-2C), with dual flush (7. 5-4. 5 l/ 4-2 l) and flexible cable technology, factory setting 6 and 3 litres, with protection cap for the flush pipe,
SANIT fill valve Noise Class I, 2-part angle valve connection set R 1/2, 4-position adjustable mounting clip, PE WC connection bend 90Gr DN90 (d: 90) with reducing sleeve DN90 (d: 90)/DN100 (d: 110) with protection cap, SANIT complete WC connection set DN 90(d: 90)/180mm, protection box for access opening and ceramic fittings can be cut to size, flexible hose to fill valve, can be screwed by hand, 2 M12 WC retaining bolts, incl. templates for transferring the access openings to the cladding panel, mounting material, protection plug and installation instructions, packed in a box
equipped with revision box for connection facility for shower toilets and electronic release, with INEO FRESH box for water box cube, with small access opening, for wall-hung WC with mounting distance 180/230mm, front-operated, h/w/d: 1, 120/450/130mm, WC mounted 50mm higher than the standard height, for wall-hung WCs with an overhang > 60 cm, self-supporting powder-coated steel frame, for covering with plasterboard, installation onto a solid wall, in drywall constructions etc. , 4-point-fastening, fully pre-assembled, includes self-locking feet with swivel base plates and fastening set, adjustment range of feet from
unfinished floor level to upper edge of finished floor level: 0-200mm, adjustment range front to wall: 135-205mm (when mounted on wall brackets code no. 17. 257. 00. . T000), with back-to-back installation distance between front edges 270-310mm, with SANIT double bend, SANIT concealed cistern with insulation against condensation (CC-121-S-FO-2V-2C), with dual flush (7. 5-4. 5 l/ 4-2 l) and flexible cable technology, factory setting 6 and 3 litres, with protection cap for the flush pipe,
SANIT fill valve Noise Class I, 2-part angle valve connection set R 1/2, 4-position adjustable mounting clip, PE WC connection bend 90Gr DN90 (d: 90) with reducing sleeve DN90 (d: 90)/DN100 (d: 110) with protection cap, SANIT complete WC connection set DN 90(d: 90)/180mm, protection box for access opening and ceramic fittings can be cut to size, flexible hose to fill valve, can be screwed by hand, 2 M12 WC retaining bolts, incl. templates for transferring the access openings to the cladding panel, mounting material, protection plug and installation instructions, packed in a box
Concealed cistern tested to DIN EN 14055, Noise Class I
The cleaning cubes being used must be suitable for WC plastic cisterns and must not contain chlorine or any oxidizing components, otherwise the cistern may be damaged (e. g. stress cracking).
Accessories:
- fastenings (wall brackets, feet, bottom wall bracket)
- WC flush actuators
- sound-absorbing sets
- WC connectors (double bend, offset connection bend, etc. )
- cladding panel code no. 17. 115. 00. . S000
- roughing-in set for shower toilet code no. 03. 956. 00. . 0000
- adjustable flush reducer code no. 05. 261. 00. . 0000