05.391.00..0000
SANIT WC control encoded radio signal battery

WC control systeme using encoded radio signals for accessible
construction as per DIN 18040
Finishing set with 6V DC battery
WC flush system for manual remote flush actuation via arm supports with wireless push putton, for concealed cisterns with small access opening (from year of construction 2014) CC-121-S-FO-2V-2C, CC-122-S-UO-2V-2C and CC-150-S-UO-2V-2C

Contents:
- low-voltage motor for lifting device and control electronics with bracket
- radio receiver module
- battery compartement 6V DC

Parameters:
- automatic interval flush factory set to 24 h
- loating output, power rating 42V/0.5 A, pulse duration 0.5 sec.
- connection with up to 32 radio transmitters possible
- manual single flush also possible
- flush volumes from 4.5-9 l depending on the concealed cistern model
- with error-safe plug connections

Settings on low-voltage motor can be adjusted via service and maintenance remote control DO-5.1 S*): 0-108 h interval flush after last electronic flush

- frequency: 868.4 MHz (ISM range, no registration required, not subject to fees)
- transmission security by means of an automatic encoding procedure
- power output: < 5 mW, range 10 m, ambient temperature -20°C
to 65°C
- radio receiver module with additional output for freely definable function *) to be ordered separately
Accessories:
- radio transmitter code no. 03.162.00..0000
- service and maintenance remote control code no. 03.806.00..0000

Do you have any questions about our products?

Please contact us!
EN
Sanitärtechnik Eisenberg GmbH

+49 (0) 36691 598-0

info@sanit.com

x